Home/PN 2001 / 2004/Hansel

Hansel

The Hansel is the first production variant built on the proven, patent-pending receiver interface. Available in Aimpoint ACRO® and Trijicon RMR® footprint variants.

Footprint

ACRO / MPS footprint. Supports popular and proven micro red dots. Note: The length of the dovetail is based on the ACRO. Optics with shorter bodies may not fully cover the dovetail (Steiner MPS / Burris Fastfire E), and optics with longer bodies may overhang (L&S PB-3). Does not affect function.

Pricing will be announced to the list first.

Closeup of the Hansel MP5 optics mount with Aimpoint ACRO P-2 red dot installed on an MP5 receiver
  1. 01Aimpoint ACRO® P-2, shown mounted
  2. 02Single-claw unitary body
  3. 03Top tensioning screw
  4. 04Lateral stabilization screws
Hansel ACRO / PN 2001 Fig. 1
3.3 oz Weight
1 body, 3 screws Hardware
~1.5 in riser Optic height on a picatinny MP5 rail
7075 aluminum Anodized MIL-PRF-8625 Type III

01

Design

01

Built-in Riser

The riser height supports passive night vision use and magnifier compatibility. The optic is set about the height of a standard 1.5" riser on top of a normal picatinny MP5® rail.

02

Compatibility

Confirmed fitment includes MP5, MP5K, AP5, and AP5K. It is not compatible with G3, HK91, HK93, or any receiver where the claw points do not span the ejection port.

Hansel mount with an Aimpoint ACRO P-2 installed on an MP5 receiver
Fig. 2ACRO P-2 on an MP5 receiver
MP5K with the Hansel MP5 optics mount, an Aimpoint ACRO P-2, and a flip-to-side magnifier behind it
Fig. 3MP5K with flip-to-side magnifier

02

Specifications

Hansel, all variants
Part number 2001 (ACRO) / 2004 (RMR)
Fitment MP5, MP5K, AP5, AP5K, other 9mm Roller Lock clones
Optic footprints ACRO / RMR
Optic height Approximately equal to a 1.5 in riser on a picatinny MP5 rail
Hardware 1 unitary body, 3 screws
Installation Hansel ACRO installation guide
Weight 3.3 oz
Dimensions 3.3 in x 1.4 in x 2.2 in
Material and finish 7075 aluminum, anodized MIL-PRF-8625 Type III
Origin Machined and anodized in the USA. Hardware (screws) may be imported until a US source is onboarded.